|
|
 |
| |
|
|
|
|
• |
Design or enter as-built data
for road, sewer or pipe profiles
on existing profiles or grid at
any horizon or vertical scale.
No elaborate setup! Design
roads using sight distance or K
values for review and
compliance. |
|
• |
Screen based template design -
All template design features
(grades, curbs, medians,
subgrades, cut or fill treatment
...) displayed as icons. Input
data of existing templates are
displayed and reviewed
graphically on screen. |
|
• |
Simple or complex template
design - Create simple two lane
or complex four lane divided
highways with inside and outside
curbs, super-elevation, variable
width, subbase, multiple
templates, right-of-way
treatment, etc. |
|
• |
Stored templates can be plotted
as template details for a normal
full template or only left,
right, cut, fill, super, curb or
median treatment. |
|
• |
Powerful road design - Carlson
Roads is the only PC road design
software that can, with one
command, draw an entire road in
3D showing everything from
median, surface pavement, curbs,
shoulders, ditches, with
automatic cut or fill outslopes
drawn as smooth slope
transitions or slopes in
series. Draw finished grade
contours that tie into the
existing contours and break the
existing contours within the
disturbed area of the road and
put them into a new layer.
Calculate the cut and fill
earthwork, median, curb, and all
subbase volumes. Output
template break points for all
cross-section stations to a
coordinate file for stakeout and
store the point descriptions of
the station, offset left or
right distance, and their
template description
(E,P,CURB1,SH ...) Output all
finished grade data, including
subbase treatment, to a cross
section file for cross section
plotting. |
|
|
|
|
|
|
|
|
|
|
|
The
recommended system
requirements for Carlson
Roads 2007 are the same as
those of AutoCAD 2007.
System
requirements for AutoCAD
2007 for users who are
focusing on 2D drawing
creation are as follows:
- Intel® Pentium® IV
processor recommended
- Microsoft® Windows®
XP Professional or Home
Edition (SP1 or SP2),
Windows XP Tablet PC
Edition (SP2), or
Windows 2000 (SP3 or
SP4)
- 512 MB RAM
- 750 MB free disk
space for installation
- 1024x768 VGA display
with true color
- Microsoft® Internet
Explorer 6.0 (SP1 or
higher)
System
requirements for AutoCAD
2007 for users who are
taking advantage of the new
conceptual design
capabilities are as follows:
- Intel® processor 3.0
GHz or greater
- Windows XP
Professional (SP2)
- 2 GB RAM or greater
- 2 GB of disk space
available, not including
installation
- 1280x1024 32-bit
color video display
adapter (true color)
- 128 MB or greater,
OpenGL®-capable
workstation class
graphics card.
Less
capable machines (such as
Pentium 233) can run Carlson
Roads 2007, but the results
may be less than ideal.
Sufficient swap space is
also required to handle the
installation of Carlson
Roads 2007 as well as any
data or drawing files saved.
The use of additional memory
or faster processors will
directly improve performance
and capacity.
No Longer
Officially Supported:
Microsoft Windows 3.x or
earlier, 95 and 98.
|
|
|
|
|
|
|
|
|
|
