DIGICAT100
DIGICAT200
Digi-System
Digicat200 |
Digicat 100 Digital
Locator,
Built to meet the needs of today's tracing operations
The Digicat
digital locator has been designed to meet the stringent and ever
more complex requirements of today’s tracing operations.
Several vital
safety features built into the Digicat are rarely found in
similarly priced units from other manufacturers.
-
Operates with a
wide range of signal generators.
-
Robust case.
-
8 and 33 kHz
tracing modes.
-
Low battery
warning indication.
-
Automatic
default to power mode at maximum sensitivity.
-
Digital
microprocessor control.
-
Dual waterproof
speakers and a headphone socket with alkaline batteries
-
Automatically defaults to power mode at maximum sensitivity.
Technical
Specifications
|
Controls |
On/off, Mode
Select, Sensitivity |
|
Display |
On/off, Mode
Select, Sensitivity |
|
Audio |
Dual
Waterproof Speakers, Headphone Socket |
|
Batteries |
6 X AA
alkaline (IEC LR6) (supplied) |
|
Battery Life |
40 hours
intermittent use |
|
Protection |
Conforms to
IP57 |
|
Frequency |
Power mode
50/60Hz, Radio mode 15-30 kHz, Generator modes 8 and 33
kHz |
|
Weight |
2.5Kg
including Batteries |
|
Depth |
Power to 3
meters; Radio to 2 meters, Generator to 3 meters |
|
DIGITEX 8/33
|
The Digitex 8/33
dual frequency generator is the perfect tracing partner for the
Digicat locator. The unit is enclosed in a high impact
structural polypropylene case.
Several standard
features are only found on high spec units from other
manufacturers equipment.
- Operates
with a wide range of location equipment.
- Robust case.
- 8 and 33 kHz
modes for maximum flexibility.
- Variable
output level.
- Battery and
output level indicators.
- Automatic
mode selection (connection / induction).
- Digital
microprocessor control.
Technical
Specifications
|
Controls |
On/off,
Mute, Frequency, Output Level |
|
Display |
Light
Emitting Diode – Frequency, Mode, Operating Bargraph –
Output/Battery Level |
|
Audio |
Sounder –
Dual Frequency |
|
Batteries |
4 X C
alkaline (IEC LR14) (supplied) |
|
Battery Life |
40 hours
continuous use |
|
Protection |
Conforms to
IP57 |
|
Frequency |
33 or 8 KHz
Constant, Dual frequency in connection |
|
Tracing
Range |
Induction
typically 150 meters, Connection typically 250 meters |
|
Weight |
2 kg
including Batteries |
|
|
The DIGITRACE
30/50/80 is a coiled 4.5mm (0.18”) diameter fiberglass rod on a
reel, which incorporates a copper wire. The wire is connected to
a DIGITEX Signal Generator to pass a 33 or 8 kHz traceable
signal either through the entire length of the rod or just the
end. Use this in tracing non-metallic pipes, such as drains or
sewers, plastic pipes, plastic ducting, etc.
-
Enables a
complete length of drain, duct or pipe to be traced when
used in conjunction with a Signal Generator.
- Available in
coiled lengths of 50 m, (164 feet) 80m (262 feet), or 100 m
(328 feet)
|
| |
|
| |
|
|
