|
|
|
3-D
Coordinate Measurement & Staking-out
|
|
Azimuth
Setting
|
|
Measure and
calculate 3-D coordinates. Display as N, E,
Z coordinate format. Stake out according to
the input coordinate value and display the
position
of staking-out point.
|
|
Automatically
set the coordinate azimuth in the
back sight direction by using the
coordinates of
the instrument point and back sight point.
|
|
|
|
|
|
|
|
|
Missing Line
Measurement (MLM)
|
|
Instrument
Height
|
|
Automatically
calculate the horizontal distance,
slope distance and elevation difference
between
two target prisms.
|
|
Instrument
height can be obtained through
measuring the height of several points
(Max.10
points).
|
|
|
|
|
|
|
|
|
Remote
Elevation Measurement(REM)
|
|
Resection
|
|
To obtain
elevation of the point at which setting
the prism is impossible.
|
|
Calculate the
coordinate of the unknown point by two or
more known points.
|
|
|
|
|
|
|
|
|
Angle Offset
|
|
Area
Calculation
|
|
Place the prism
(offset point) on the left or right of the
target point and make the distance between
the offset point and instrument point be
same to that between target point and
instrument point. After measuring offset
point, face the instrument to the direction
of target point, then the coordinates of
target point will be calculated
automatically.
|
|
Calculate the
area of a closed figure from
measured data or coordinate data file.
|
|
|
|
|
